CatCam Camera Bedienungsanleitung PDF herunterladen (Seite 5)

CatCam v2 User Manual - Page 5 of 11

3. Charge Camera

Charging and data exchange is by means of USB. To connect the camera to the

USB interface the enclosure’s lid must be opened.

The camera is supplied by an integrated rechargeable Lithium-Polymer battery.

Charging of the camera takes about 2 hours. Make sure that the camera is turned off

before you connect it to the computer.

You may notice that the camera board sits lose in the enclosure. When you want to

disconnect the USB cable you need to hold the camera board with some finger so it

does not slide out.

After charging or setup close the lid. For additional protection you may want to use

some tape to keep the lid closed.

Note: If the camera is connected to an USB port for a longer duration in

some cases it can not be activated any more (green light of the control unit

works but orange light of camera core is not coming on). In such cases a

short reconnection of the camera to the USB port will solve the problem.

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

CatCam Camera Bedienungsanleitung Seite 5