CatCam Camera Bedienungsanleitung PDF herunterladen (Seite 6)

CatCam v2 User Manual - Page 6 of 11

4. Insert Memory Card

If the camera is bought without a memory card or the memory should get changed

then proceed as described:

 Ensure that the camera is turned OFF and not connected to the USB

interface.

 Open the enclosure and pull out the whole camera board.

 The circle marks the slot for the memory card (Micro SD). Here, put in the

memory card with label facing up until it locks in. To eject, first press the card

into the slot until it releases then pull it out.

5. Picture Storage and Download

Pictures are stored in JPEG format and can be viewed with a wide range of picture

viewing/editing software.

To download the pictures open the camera as described before and connect the

cable to the USB interface. The computer should recognize the camera as an

additional drive. If this not the case check if the camera is switched off before

connecting it to the computer.

Now you can copy and erase files like on a regular hard disk.

Note: Prior to disconnecting the camera from the computer make sure you

stopped it with the device manager. Otherwise the file system of the camera

may become corrupt.

1 2 3 4 5 6 7 8 9 10 11

Keine Kommentare

CatCam Camera Bedienungsanleitung Seite 6